XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
5. Install the steering rack (if removed for access).
Reposition the steering rack.
Install and tighten the rack mounting bolts on the passenger side to 40-50 Nm.
Tighten the rack mounting bolts on the driver's side to 40 -5 0 Nm.
6. From above the vehicle, connect the EGR pipe to the exhaust manifold.
Install a new EGR gasket to the manifold.
Reposition the EGR pipe to the manifold.
Install the two nuts which secure the EGR flange to the exhaust manifold. Tighten to 18-24 Nm.
7. Install the downpipe catalytic converter, right hand side.
8. Install the front silencer.
9. Install the air cleaner assembly.
10. Remove paintwork protection sheets and close the engine compartment.