XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. Rotate bulb holder 1/4 turn counter-clockwise and remove from module.
7. Remove bulb from holder.
Installation
1. Install bulb in holder.
2. Install bulb and holder in module and rotate 1/4 turn clockwise to fully seat.
3. Install switch module in console ensuring that end locators are fully seated.
4. Connect switch module harness multiplug.
5. Install radio console.
6. Install center console.
7. Install J gate surround.
8. Connect ground cable to battery terminal and install battery cover. See Battery Reconnection Procedure. See: Starting and
Charging/Battery/Service and Repair