XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. Remove brake-disc shield from vertical link.
-
Remove screws.
-
Remove disc shield.
7. Remove ABS hub rotor nut from vertical link and hub assembly.
8. Remove grease deflector from rotor nut.
9. Clean components.
Installation
1. Install grease deflector to rotor nut.
-
Install the grease deflector ring as shown with deflectors towards rotor teeth.
-
The distance at 'A' must be 0.5 mm.
2. Install ABS hub rotor nut to vertical link and hub assembly.
3. Install disc shield to vertical link.
-
Position disc shield.
-
Install and tighten bolts.
4. Install vertical link and hub assembly to vehicle.
5. Install brake disc.
6. Install wheel.
7. Remove stands and lower vehicle.
Rear Suspension Bolt-ABS Sensor to Hub Carrier
8 - 10 Nm
Nut-Hub
304 - 336 Nm