XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-383025.png)
15. Using new tie strap, secure wheel speed sensor harness to hub carrier.
16. Install Handbrake shoes.
Install brake disc.
18. Position special tool (204-195) on hub studs and install securing nuts.
19. Tighten hub nut to 304 - 336 Nm.
20. Remove securing nuts and withdraw special tool (204-195) from hub.
21. Install rear wheel.
22. Raise rear of vehicle, remove stands and lower vehicle.
