XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
(1) Remove the seven bolts which secure the throttle induction elbow.
(2) Remove the elbow.
(3) Remove the induction elbow gasket from the manifold.
15. Clean the manifold and mating faces on the cylinder heads. Clean all other parts and relevant mating faces.
Installation
1. Fit the induction elbow to the inlet manifold.
(1) Fit a new gasket between the induction elbow and the inlet manifold.
(2) Fit and tighten the seven bolts securing the induction elbow to the inlet manifold.