XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1119001.png)
Ignition Control Module: Service and Repair
Removal
1. Disconnect battery ground cable. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
2. Disconnect connector from ignition control module.
3. Remove fixings securing module.
Remove module
Installation
1. Installation is a reversal of the removal procedure. Refer to the Battery Reconnection Procedure. See: Starting and Charging/Battery/Service and
Repair
