XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
4.
Rotate the throttle quadrant to allow disconnection of the inner cable.
5.
* If installed, release the cable tie fitted around the throttle cable adjuster nut and the abutment bracket, and displace the throttle cable adjuster nut
from the abutment bracket.*
6.
If installed, release the throttle cable locking nut and displace the outer cable from the abutment bracket.
Note:
Do not disturb the adjusting nut.
6.
Remove the coolant hoses and install suitable blanking plugs.