XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Installation
1. Fit inertia reel assembly.
Position inertia reel on parcel shelf panel ensuring that dowel locates correctly in reel housing.
Fit and tighten inertia reel to panel securing bolt.
2. Secure belt lower anchor plate.
Moving rear quarter casing for access, position belt lower anchor plate at seatpan location.
Fit securing bolt to anchor plate, place card washer and spacer on bolt.
Fit and tighten bolt securing belt anchor plate in seatpan location ensuring dowel locates in slot.
3. Fit parcel shelf. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
4. Fit rear quarter casing. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair
5. Fit escutcheon over belt and press firmly into casing aperture.
6. Fit coat hanger hook.
7. Fit rear seat cushion and squab.