XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
![background image](/jaguar/xk-8_coupe_(x100)/v8-4.0l_(aj26)/Page-1612002.png)
7. Disconnect the starter motor solenoid terminal.
Reposition the rubber boot from the terminal.
Remove the nut from the solenoid terminal.
Disconnect the cable from the terminal.
8. Remove the starter motor securing bolts.
Remove the upper securing bolt. Preferably, use a short 13 mm spanner or a Snap On Half Moon spanner CMX1113 to initially loosen the bolt.
(Refer to the next step).
Remove the lower securing bolt.
Carefully remove the starter motor.