XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Power Steering Pump: Service and Repair
Power Steering Pump
Removal
1. Open engine compartment and fit paintwork protection covers.
2. Set engine compartment cover to service access position.
3. Disconnect battery ground cable.
4. Loosen, but do not remove bolts which secure drive pulley to power steering pump.
5. Remove front end accessory drive belt.
6. Remove pulley from power steering pump.
Remove bolts.
Remove pulley.
7. Release harness retaining clip from engine oil dipstick-tube bracket, reposition harness.