XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Control Arm Bushing: Service and Repair
Upper
Wishbone Bushes-Upper
Removal
1. CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices
restrict the number of times a nut or bolt can be used.
Open engine compartment and fit paintwork protection covers to fenders.
2. Raise front of vehicle and support on stands.
3. Remove front wheel.
4. Release ABS speed sensor harness from upper wishbone.
Remove tie straps.
Reposition harness.
5. Remove nut from upper ball joint.
6. CAUTION: Do not allow the weight of the vertical link to hang on the brake hose.