XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1762003.png)
Remove hub carrier from wishbone
Remove pivot pin from hub carrier.
Withdraw hub carrier and support carrier on block of wood.
9. CAUTION: Note position of shims during removal. They must be returned to their original position during installation.
Noting their positions, remove shim from each end of pivot pin sleeve.
10. WARNING: ENSURE THE SPECIAL TOOLS ARE POSITIONED DIAMETRICALLY OPPOSITE ON THE SPRING AND THE
ARMS ARE CORRECTLY SEATED.
WARNING: WHEN COMPRESSING THE SPRING, TIGHTEN THE SPECIAL-TOOL ADJUSTMENT BOLTS EVENLY.
