XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1769018.png)
10. Reposition upper wishbone.
Align upper wishbone to crossbeam.
Temporarily fit fulcrum shaft.
11. Position shock absorber and spring assembly in spring compressor tool
Secure spring compressor in a vice.
Position adapter tool in lower arms of the spring compressor, make sure arms locate into adapter tool recesses.
Position shock absorber and spring assembly into spring compressor, make sure lower spring pan is seated correctly in adapter tool.
12. Locate upper arms of spring compressor as near to the top of the spring coil as possible.
