XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
![background image](/jaguar/xk-8_coupe_(x100)/v8-4.0l_(aj26)/Page-1799024.png)
12. Install locating collar and hub nut on axle shaft, but DO NOT tighten hub nut.
13. Tighten pivot pin nut to 90 - 110 Nm.
14. Install wheel speed sensor on hub carrier.
Position sensor on hub carrier and install and tighten bolt to 7 - 10 Nm.
Connect wheel speed sensor harness to sensor.