XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Pressure Regulating Solenoid: Service and Repair
Pressure Regulator Valve
Removal
1. Open the drivers door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect battery ground cable.
Remove the battery cover.
3. WARNING: TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE
OBSERVED.
Raise the vehicle on a suitable lift.
Carefully remove the drain plug and drain the transmission fluid.
4. Remove the twenty-two fixings which secure the fluid pan .
Remove the fluid pan and all traces of gasket material.