XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
6. Remove the input speed sensor.
NOTE: M5 fixing.
Remove the screw from the input speed sensor securing bracket and pull the sensor clear.
Disconnect the harness multiplug.
7. Remove the output speed sensor.
NOTE: M6 fixing.
Remove the screw from the output speed sensor securing bracket and pull the sensor clear.
Disconnect the harness multiplug.
8. Disconnect the five pressure regulator connectors and three solenoid connectors.
9. Reposition the internal harness for access.