XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
![background image](/jaguar/xk-8_coupe_(x100)/v8-4.0l_(aj26)/Page-1477002.png)
5. Remove the input speed sensor.
NOTE: M5 fixing.
Release the screw which secures the input speed sensor bracket and pull the sensor clear.
6. Disconnect the multiplug from the speed sensor.
Installation
1. NOTE: M5 fixing.
Connect the multiplug, install the input speed sensor and securing bracket. Tighten the screw to the specified torque figure.
2. NOTE: Ensure extreme cleanliness and never reuse transmission fluid.