XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Vehicle Speed Interface Module: Service and Repair
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. Refer to 'Starting and Charging, Battery, Service and Repair.'
2. Remove passenger side false bulkhead cover.
Pull forward then lift cover inner edge to release tangs.
Pull cover inwards to release outer tabs and lift clear.
3. Remove engine compartment coolbox cover screws.
4. Remove module from coolbox lid.
Carefully lift and invert lid for access.
Disconnect module harness connector.
Release module from velcro pad.
Installation