XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
7. Disconnect air bag control module harness multiplugs.
8. Remove fascia harness to cabin harness multiplugs from mounting bracket and reposition for access.
9. Remove air bag control module from fascia.
-
Slacken and remove the two air bag module mounting bracket to fascia outer securing bolts.
-
Slacken and remove module/fascia securing bolt.
-
Slacken and remove air bag control module upper securing bolt.
-
Remove air bag control module from vehicle.
Installation
1. Fit air bag control module.
-
Position air bag module at fascia.
-
Fit but do not tighten the two module mounting bracket outer securing bolts.
-
Fit but do not tighten the module/fascia securing bolt.
-
Fit and tighten module upper securing bolt.
-
Tighten all module securing bolts.
2. Connect air bag control module.
-
Connect module harness multiplugs.
-
Position and fit fascia to cabin harness multiplugs to mounting bracket.
3. Fit footwell lamp.
-
Align and fit footwell outlet duct.
-
Position footwell lamp mounting bracket and fit and tighten securing screws.
-
Connect footwell lamp harness multiplug.
4. Fit body processor module.
5. Fit glove box.
6. Connect ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and Repair