XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1100019.png)
9. Install hub assembly to wishbone and axle assembly.
Position hub and carrier to wishbone and axle shaft.
Install pivot pin in sleeve with threaded end at front.
10. Install washer and nut on pivot pin, but DO NOT tighten nut.
11. Install hub on axle shaft.
Route parking brake cable through hub carrier aperture and install grommet.
Apply Loctite 270 to axle shaft splines and thread, and fully seat hub on shaft.