XK (X100) V8-4.2L (2005)
18. Remove blanking plugs from PAS hoses and pinion housing ports.
19. Connect return hose to pinion shaft housing.
-
Apply clean PAS fluid to a new O-ring and fit to hose.
-
Connect and fully seat hose.
20. Connect feed hose to pinion shaft housing.
-
Apply clean PAS fluid to a new O-ring and fit to hose.
-
Connect and fully seat hose.
21. Fit retaining plate to pinion housing.
1. Align retaining plate and hoses.
2. Fit and tighten bolt.
22. Secure PAS hose to steering rack.
1. Fit insulation rubbers.
2. Secure hose to steering rack with tie straps.