XK (X100) V8-4.2L (2005)
7. Fit front engine mounting bolts, but DO NOT tighten at this stage.
-
Repeat procedure on opposite-side mounting.
8. Connect connector to steering rack transducer.
9. NOTE: Make sure steering wheel and road wheels are in the central position.
Connect steering column to pinion shaft.
-
Align steering column to pinion shaft.
2. Fit and tighten bolt.
10. NOTE: Guide shock absorber upper mountings into body apertures when lowering vehicle.
Remove stands and lower front of vehicle.
11. Secure shock absorber upper mountings to body.
-
Fit and tighten nuts.
-
Vehicles fitted with adaptive damping: connect connector.
-
Fit covers.
-
Repeat procedure to secure opposite-side shock absorber.
12. Release weight of engine.
1. Loosen hook adjustment nuts.
2. Remove hooks from lifting eyes.
3. Remove special tool.