jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

NHTSA04V024000 > < A/T, Engine Controls - Harsh A/T Shifts
Page 2
background image

(140° f)).

9.

Accelerate from rest with light throttle (do not exceed the upper rev limit in appendix 1).
1-2, 2-3, 3-4 shifts must occur with engine speed between the following limits:.

Note:

Do not move the accelerator pedal during shifts.

^

4.2L N/A Prior VIN A37132 1450 - 1600 rpm

^

4.2L N/A From VIN A37133 1550 - 1700 rpm

10.

Continue to accelerate gently to 50mph (80km/h) 50 that transmission shifts into 5th gear.

11.

Go into overrun and let the transmission shift down into 4th gear without braking.

12.

Brake gently to a standstill and hold footbrake on for at least 15 seconds.

13.

This process should be carried out at least five times.

Parts Information:

Warranty Information:

Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable
parts/miscellaneous expense codes as listed.

Note:

Repair procedures are under constant review, and therefore repair times are subject to change. The times quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.

Disclaimer

NHTSA04V024000 > < A/T, Engine Controls - Harsh A/T Shifts