XK (X150) V8-4.2L (2008)
Cowl Moulding / Trim: Service and Repair
Cowl Vent Screen (76.10.01)
Removal
CAUTION: Always protect paintwork and glass when removing exterior components.
1. Remove the air intake cover.
-
Remove the 3 clips.
2. Remove the brake master cylinder cover.
-
Remove the 4 clips.
3. Remove the windshield wiper arms.
4. Remove the plenum chamber panel.
-
Release the retaining clip.
-
Release the 3 clips.
-
Disconnect the washer jet hose.
Installation
1. Install the plenum chamber panel.
-
Connect the washer jet hose.
-
Carefully secure the clips.
2. Install the air intake cover.
-
Carefully secure the clips.
3. Install the brake master cylinder cover.
-
Carefully secure the clips.
4. Install the windshield wiper arms.