XK (X150) V8-4.2L (2008)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley - Vehicles Without: Supercharger
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the accessory drive belt.
3. Remove the accessory drive belt idler pulley.
> Remove the bolt.
Installation
1. Install the accessory drive belt idler pulley.
> Tighten the bolt to 25 Nm (18 lb.ft).
2. Install the accessory drive belt.
3. Connect the battery ground cable and install the cover.