XK (X150) V8-4.2L (2008)
Intake Manifold: Service and Repair
Intake Manifold
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the throttle body.
3. Remove the RH engine cover bracket.
> Remove the 2 nuts.
> Disconnect the electrical connector.
4. Remove the LH engine cover bracket.
> Remove the 2 nuts.
> Release the 2 electrical connectors.
> Remove the purge valve bolt.
5. Release the engine wiring harness from the intake manifold.
> Release the 4 clips.
6. Release the wiring harness from the rear of the engine.
> Remove the 2 bolts.