XK (X150) V8-4.2L (2008)
/v8-4.2l/Page-377007.png)
20. Attach the wiring harness.
> Tighten the bolts to 10 Nm (7 lb.ft).
21. Install the LH engine cover bracket.
> Attach the purge valve, align the peg and tighten the bolt to 6 Nm (4 lb.ft).
> Secure the electrical connectors.
> Tighten the nuts to 6 Nm (4 lb.ft).
22. Install the RH engine cover bracket.
> Connect the electrical connector.
> Tighten the nuts to 6 Nm (4 lb.ft).
23. Install the throttle body.
24. Connect the battery ground cable and install the cover.
