XK (X150) V8-4.2L (2008)
Fog/Driving Lamp: Service and Repair
Fog Lamp Bulb
Fog Lamp Bulb
Removal
NOTE: Left-hand shown, right-hand similar.
1. Disconnect the battery ground cable.
2. Turn the steering on to full lock for access.
3. Release the front of the fender splash shield.
-
Remove the 5 Torx bolts.
-
Tie the splash shield aside.
4. Remove the front fog lamp bulb.
-
Release and disconnect the electrical connector.
Installation
1. Install the fog lamp bulb.
-
Connect and secure the electrical connector.
2. Install the fender splash shield.
-
Tighten the Torx bolts.
3. Connect the battery ground cable.