XK (X150) V8-4.2L (2008)
/v8-4.2l/Page-293002.png)
-
Tighten the nut to 25 Nm (18 lb.ft).
3. Install the cowl side trim panel.
-
Align the pegs and secure the clip.
-
Install the scuff plate trim panel.
-
Install the hood release lever and secure with the screw.
4. Install the passenger side footwell trim panel.
-
Carefully secure the clips.
5. Connect the battery ground cable and install the cover.
6. Using WDS, configure a new CJB.
