XK (X150) V8-4.2L (2008)
/v8-4.2l/Page-6002.png)
1. Install the information and entertainment module.
-
Tighten the Torx bolts to 6 Nm (4 lb.ft).
-
Connect the electrical connectors.
2. Install the navigation system module bracket.
-
Tighten the Torx screws.
3. Install the instrument panel center reinforcement trim panel.
-
Align the pegs and secure with the clips.
4. Connect the battery ground cable.
5. Connect WDS to the vehicle and configure a new module.
