XK (X150) V8-4.2L (2008)
Convertible Top Control Module: Service and Repair
Convertible Top Module
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Make the SRS system safe.
3. Remove the LH roll over protection unit.
4. Remove the convertible top module.
-
Disconnect the 4 electrical connectors.
-
Remove the 2 nuts.
Installation
1. Install the convertible top module.
-
Tighten the nuts to 10 Nm (7 lb.ft).
-
Connect the electrical connectors.
2. Install the LH roll over protection unit.
3. Connect the battery ground cable and install the cover.