XK (X150) V8-4.2L (2008)
Installation
1. Install the front seat cushion cover.
2. Secure the passenger seat cushion and occupant classification sensor assembly.
-
Connect and secure the electrical connectors.
-
Secure the Velcro strap.
-
Attach the clips.
3. Secure the occupant classification assembly to the seat cushion frame.
-
Secure with the clips.
4. Secure the harness to the seat airbag and backrest frame.
-
Connect the electrical connector.
-
Secure the wiring harness with the clip.
5. Attach the harness to the lumbar assembly.
-
Connect the electrical connectors.
-
Secure with the clips.
6. Secure the front seat backrest cover rear panel retaining clips.
-
Attach to the seat frame.
-
Attach to the backrest cover.
7. Attach the harness assembly to the module bracket.
-
Connect the electrical connectors.
-
Secure the electrical connectors.
-
Secure the wiring harness in the clips.
-
Install and tighten the Torx screws.
8. Secure the seat module bracket.
-
Connect the electrical connectors.
-
Secure the wiring harness in the clips.
-
Secure the harness with a cable tie.
-
Tighten the Torx bolts to 10 Nm (7 lb.ft).
9. Secure the front seat backrest cover lower tension straps.
10. Install the front seat cushion outer trim panel.
-
Connect the electrical connector.
-
Secure in the clips.
11. Secure the front seat cushion outer trim panel.
-
Tighten the Torx screws.
12. Install the front seat hinge covers.
-
Attach the hinge cover retainers.
-
Tighten the Torx screws.
13. Install the front seat.
14. Connect the battery ground cable and install the cover.
15. Using IDS, calibrate a new front seat cushion.