XK (X150) V8-4.2L SC (2007)
Control Module HVAC: Service and Repair
Climate Control Module
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the instrument panel.
3. Remove the A/C control module.
-
Remove the 4 Torx screws.
-
Disconnect the electrical connector.
Installation
1. Install the A/C control module.
-
Install the Torx screws.
-
Connect the electrical connector.
2. Install the instrument panel.
3. Connect the battery ground cable and install the cover.
4. Connect WDS to the vehicle and configure a new module.