XK (X150) V8-4.2L SC (2007)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Reservoir (84.10.01)
Removal
NOTE: Some fluid spillage is inevitable during this operation.
1. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Remove the RH fender splash shield.
3. Remove the windshield washer reservoir filler neck.
-
Release the clip.
4. Release the washer reservoir.
-
Remove the 2 bolts.
5. Remove the windshield washer reservoir.
-
Position a container to collect spillage.
-
Disconnect the 3 electrical connectors.
-
Carefully release the clip.
-
Disconnect the 2 washer jet hoses.
NOTE: Note the fitted position.