XK (X150) V8-5.0L SC (2010)
RDS
radio data system
RHD
right-hand drive
SAI
secondary air injection
SAIMAP
SAI map sensor
SDARS
satellite digital audio radio system
SEAT_12WAY 12 way seat
SEAT_16WAY 16 way seat
SMOG_SNSR pollution sensor
TPMS
tire pressure monitoring system
TV
television
VICS
vehicle information and communication system
Grounds
Grounds
-
There may be up to three eyelets on one ground stud.
-
A, B and C are used to indicate the position of the eyelet on the stud: A - first (bottom), B - second (middle), C - third (top).
-
Two eyelet variations are used: a single eyelet and an eyelet pair. The single eyelet has a single leg, which is identified by an S; the eyelet pair has
two legs, identified as L (left) or R (right).
On figures where LHD and RHD circuits are combined and the ground designation differs from LHD to RHD, the RHD ground code is shown in
parentheses. If the ground designation is the same for LHD and RHD, only one ground code is used, with no parentheses.
Component Depictions
Using Wiring Diagrams
Using Wiring Diagrams
Health and Safety
Always follow health and safety guidelines, specifically the Electrical Precautions provided within this product.
Important
The information provided in this publication is for use only by competent, qualified auto-electricians. Good product knowledge is assumed, as well as the
ability to access and use recommended test equipment and other reference material provided.
Test equipment and other reference material
The information in this publication should be used in conjunction with the recommended test equipment; refer to Workshop Manual. Other reference
material includes: Electrical Circuit Diagrams, Technical Service Bulletins (TSB) and the Workshop Manual.
Battery disconnection and reconnection