XK (X150) V8-5.0L SC (2010)
/v8-5.0l_sc/Page-61001.png)
Air Bag Control Module: All Technical Service Bulletins
Restraints - Air Bag Lamp On/DTC's B0061-64 Stored
NUMBER JTB00174
(ISSUE 1)
MODEL XK
DATE 05 AUG 2009
SECTION: 501
Airbag Warning Lamp Illuminated with DTC B0061-64 Stored - Repair Procedure
AFFECTED VEHICLE RANGE:
XK (X150)
VIN: B32753 - Onwards
Model Year: 2010 - Onwards
CONDITION SUMMARY:
Situation:
An issue has been identified where the airbag warning lamp may be illuminated with Diagnostic Trouble Code (DTC) B0061-64 stored in the Restraints
Control Module (RCM). This may be caused by the Occupant Classification Sensor (OCS) DTC broadcast to the RCM momentarily ceasing during an
extended engine 'crank' of eight (8) seconds or longer.
NOTE:
The Supplemental Restraints System (SRS) performance is not impaired as a result of this condition.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to reconfigure the RCM.
PARTS:
No parts required; information only
TOOLS:
Latest IDS DVD; software first available on IDS DVD118.5 Patch File 10 Midtronics PSC-550 Vehicle Power Supply
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer
to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
RECONFIGURE THE RESTRAINTS CONTROL MODULE
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis / module programming.