XK (X150) V8-5.0L SC (2010)
NOTE:
Figures 6 - 8 depict the shock absorber assembly inverted (as installed in the special tool).
5. Use a suitable marker to mark the position of the anti-friction tape. (Figure 6)
6. Trim excess material as necessary: (Figure 7)
7. Ensure correct positioning of anti-friction tape. (Figure 8)
8. Refer to Workshop Manual (GTR) section 204-02 and install the left-rear shock absorber.
9. Repeat steps 1 - 8 on the right-rear spring.