jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Engine - Start-Up and Idle Rattle|Page 913 > < Engine - Start-Up and Idle Rattle|Page 907
Page 1
background image

Timing Chain Tensioner: Customer Interest
Engine - Start-Up and Idle Rattle

303-68

DATE
O3IO5

V8 XJ Series/XK

MODEL
1997-2002 MY- XK Range
1998-2002 MY V8 XJ Series

VIN
001001-A24195
812256-F41862

Start-up and Idle Rattle - Primary Or Secondary Chain Tensioner - Replace

Issue:
Some vehicles within the above VIN ranges may exhibit a rattle emanating from the engine on start-up and idle.

Cause:
Failure of a primary or secondary timing chain tensioner.

Note:

Any faults other than timing chain tensioners are to be carried out as a separate Warranty Claim.

Action:

In case of a verified customer complaint, and the fault has been confirmed as a timing chain tensioner, install new primary or secondary timing chain
tensioners as outlined below.

Note:

If there is a fault with a primary tensioner, all primary and secondary tensioners must be replaced. If there is a fault with a secondary tensioner, then
both secondary tensioners must be replaced.

Note

When installing the new secondary tensioner, the new modified (shorter) bolts must be installed.

To install primary or secondary timing chain tensioner, see Global Technical Reference GTR Workshop Manual, (for all VIN ranges use 1999 MY)
section 303-01.

Parts Information:

Warranty Information:

Engine - Start-Up and Idle Rattle|Page 913 > < Engine - Start-Up and Idle Rattle|Page 907