XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Hood Ajar Switch: Service and Repair
Hood Ajar Switch (86.65.99)
1. Open hood and fit cover to RH side fender.
2. Release hood open microswitch harness multiplug from body tang and disconnect multiplug.
3. Remove three bolts securing RH bonnet latch/microswitch assembly to body.
4. Withdraw hood release outer cable from latch mounting bracket.
5. Disconnect hood release cable hook from latch lever.
6. Remove latch/microswitch assembly from vehicle.
1. Position latch/microswitch assembly at body.
2. Connect release cable hook to latch lever.
3. Locate and fully seat release outer cable in latch mounting bracket.
4. Position latch/microswitch assembly on body apertures and install securing bolts.
5. Connect hood open microswitch harness multiplug and fit and fully seat multiplug on body tang.
6. Remove fender cover, shut hood and check that latch and microswitch function correctly.