XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-986003.png)
6. Release retaining tangs and remove top cover from stop lamp.
Installation
1. Install top cover on stop lamp ensuring retaining tangs are fully seated.
2. Routing harness through aperture, position stop lamp assembly on trunk lid.
3. Install stop lamp to trunk lid securing nuts.
4. Install blanking plugs to underside of trunk lid.
5. Connect stop lamp multiplug to trunk lid harness.
6. Using new fasteners, secure forward edge of liner to trunk lid.
7. Close trunk lid.
