XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Turn Signal Bulb: Service and Repair
Front Direction Indicator Lamp Bulb
Removal
1. Open hood and install front fender cover.
2. Release headlamp access panel inner retaining tangs and remove panel.
3. Rotate direction indicator lamp bulb holder 1/4 turn clockwise to release it from headlamp assembly.
4. Rotate bulb 1/4 turn to release and remove bulb from holder.
Installation
1. Install direction indicator lamp bulb in bulb holder and rotate 1/4 turn to fully engage.
2. Install bulb holder to headlamp and rotate 1/4 turn counterclockwise to seat and fully engage.
3. Reposition water shedder.
4. Install headlamp access panel ensuring that seal is in position and retaining tangs are correctly engaged.