XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Grounds
Grounds
HARNESS CODE + GROUND STUD NUMBER + EYELET STUD POSITION (A, B, C) + EYELET DESIGNATION (S, L, R)
Eyelet stud position
There may be up to three eyelets on one stud. A, B and C are used to indicate the position of the eyelet on the stud: A - first (bottom), B - second
(middle), C - third (top).
Eyelet Designation
Two eyelet variations are used: a single eyelet and an eyelet pair. The single eyelet has a single 'leg', which is identified by an S; the eyelet pair has two
'legs', identified as L (left) or R (right).
Where the ground designation differs from LHD to RHD, the RHD ground is shown in parentheses. If the ground designation is the same for LHD and
RHD, only one ground designation is used.
The following connectors are the common harness-to-harness connectors used throughout the vehicle.
Multilock 040
Low current (used as harness and 'direct' connection connector).