XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
9.
Remove EGR transfer pipe to EGR valve securing screws (see Illustration 4).
10.
Reposition EGR transfer pipe for access to the gasket.
11.
Remove and discard EGR transfer pipe to EGR valve gasket.
12.
Remove EGR transfer pipe to right hand exhaust manifold securing nuts (see Illustration 5).
13.
Displace and remove EGR transfer pipe from the right hand exhaust manifold studs.
14.
Remove gasket from the right hand exhaust manifold studs.
15.
Clean the relevant components and mating faces.
16.
Install a new gasket to the right hand exhaust manifold studs.
17.
Install EGR transfer pipe to the right hand exhaust manifold studs.
18.
Install, but do not fully tighten, EGR transfer pipe to right hand exhaust manifold securing nuts (see Illustration 6).