XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Fuel Tank: Service and Repair
Installation
Installation
1. Install the fuel feed hose to inside the fuel tank and reposition the hose clip. Tighten the clip using HOSE CLIP BRASS WRENCH 412-071.
2. Install the fuel feed hose to the fuel pump.
Connect the hose to the pump.
Reposition and tighten the hose clip.
3. Install the fuel pump.
Reposition the pump to the inside of the tank, through the evaporative loss flange aperture.
Hook the upper mounting rubber onto the retaining bracket.
Slide the lower mounting onto the retaining bracket.