XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
18.
Insert the white/blue wire previously removed from the eight-way connector pin 3 into the two-way connector (Illustration 4).
Note:
Ensure the white/blue wire is installed into the correct cavity to line up with the wire in the link lead.
19.
Close the anti-back-out device.
20.
Reconnect the two-way connector (Illustration 5).
21.
Secure the two-way connector to the harness using a suitable harness tape to prevent potential rattle.
22.
Reinstall the eight-way connector to the retaining tang.
23.
Feed the link lead over the top of the steering column.
Note:
Ensure the link lead is free from potential damage from the column mechanism and any sharp edges.