XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
-
When the ignition is switched to position 'II', they will come 'ON' automatically.
Headlamp Main Beam Position.
To select the main beam position:
-
NOTE: The main beam only operates with the dipped headlamps switched 'ON'.
Push the column switch stalk away from the steering wheel.
Main Beam Flash.
To flash the main beam:
-
Pull the switch stalk towards the steering wheel.
-
It may be flashed with the ignition switch in any position and will remain 'ON' for as long as the switch is held.
-
Whenever the main beam is in operation, a blue warning lamp on the instrument cluster comes 'ON'.
Message Center Function Button.
The message center function button is located in the end of the switch stalk.
-
Select the functions by repeatedly pressing the function button.
-
The first press will switch from the odometer reading to the trip computer.
-
Further presses will cycle through the trip computer data in sequence, until the odometer reading is displayed again.