XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
5. Remove the ignition key.
Installation
1. Insert the ignition key into the lock barrel.
2. Align the lock barrel to the steering column lock.
1. Rotate the ignition key until alignment of the lock barrel is attained.
3. Install the lock barrel to the steering column lock.
1. Fully seat the lock barrel to the steering column lock.
2. Ensure that the retaining peg has engaged.
4. Turn the ignition key to the OFF position.
1. Withdraw the ignition key from the lock.