XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Vertical Link: Service and Repair
Vertical Link and Hub Assembly
Vertical link and hub assembly
Special Service Tools
Taper Separator 211-098 (JD 100)
Ball Joint Splitter 204-293
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices
restrict the number of times a nut or bolt can be used.
1. Open engine compartment and fit paintwork protectors to fenders.
2. Raise front of vehicle and support on stands.
3. Remove front wheel.
CAUTION: Do not allow the brake caliper to hang on the brake hose.
4. Remove front brake disc.
Refer to Brakes and Traction Control - Disc Brake System - Brake Rotor/Disc - Service and Repair - Procedures