XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
3. Remove nuts.
-
Repeat procedure to release opposite-side shock absorber.
9. NOTE: Guide shock absorber upper mounting studs through body when raising front of vehicle.
Raise front of vehicle and support on stands.
10. Release lower steering column from pinion shaft.
1. Remove bolt.
-
Disconnect steering column.
11. Disconnect connector from steering rack transducer.
12. Release front engine-mountings from crossbeam.
-
Remove bolt.
-
Repeat procedure to release opposite-side mounting.
13. CAUTION: To prevent damage to the crossbeam, use a wooden block between the jack and crossbeam.
Using a suitable jack support weight of front crossbeam.
14. NOTE: The bolt situated directly above the wishbone will remain captive.
Release rear mounting from crossbeam.
-
Remove bolts.