XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-625003.png)
8. Remove nut from upper-wishbone ball joint.
CAUTION: Do not allow the weight of the vertical link to hang on the lower ball joint, after releasing the upper ball joint.
9. Release upper-wishbone ball joint from vertical link.
1. Fit special tool to ball joint.
2. Tighten tool bolt to release ball joint taper-pin.
3. Remove tool and disengage ball joint from vertical link.
10. Remove nut from lower-wishbone ball joint.
